SLIDER 01
SLIDER 02
SLIDER 03
SLIDER 04
SLIDER 05
SLIDER 06
SLIDER 07
SLIDER 08
SLIDE 09
SLIDER 10

PPS-35

35th INTERNATIONAL CONFERENCE of THE POLYMER PROCESSING SOCIETY

26 - 30 MAY 2019
Radisson Blu Resort & Spa, Çeşme-İzmir/TURKEY

Çeşme awaits you for the PPS-35!

COMMITTEE

Local Organizing Committee

  • Yusuf Z. Menceloğlu, Sabancı University
  • Fevzi Çakmak Cebeci, Sabancı University
  • Serkan Ünal, Sabancı University
  • Yakup Ulçer, Ravago Inc.
  • Gökçe Uğur Erinç, Arçelik

Executive Officers

  • President: M. Cengiz Altan (Norman, OK, USA)
  • Past President: Sati Bhattacharya (Melbourne, Australia)
  • President-Elect: Jean Francois Agassant ( France)
  • Secretary: Evan Mitsoulis(Athens, Greece)
  • Treasurer: Tim Osswald, Treasurer (Madison, WI, USA)
  • Member-at-Large: Ica Manas-Zloczower(Cleveland, OH, USA)
  • Member-at-Large: Giuseppe Titomanlio (Salerno, Italy)
  • Member-at-Large: Takeshi Kikutani (Tokyo Japan)
  • IPP-Chief Editor: Jose Covas (Portugal)
  • PPP-Chief Editor: Musa Kamal (Montreal, PQ, Canada)

INTERNATIONAL REPRESENTATIVES

(LISTED ALPHABETICALLY)
  • Kyung Hyun Ahn (Korea)
  • Volker Altstaedt (Germany)
  • Mosto Bousmina ( Morocco)
  • Sebastiao Canevarolo (Brasil)
  • Phil Coates (UK)
  • Anup K. Ghosh (India)
  • Clemenz Holzer (Austria)
  • Rudolf Hufenus ( Switzerland)
  • Hiroshi Ito (Japan)
  • Sadhan Jana (USA)
  • Samuel Kenig (Israel)
  • Shih-Jung Liu (Taiwan)
  • Phan Trung Nghia ( Vietnam)
  • Jorge Alberto Medina ( Colombia)
  • Abderrahim Maazouz (France)
  • Octavio Manero (Mexico)
  • Yusuf Menceloglu (Turkey)
  • Paula Moldenaers (Belgium)
  • Hossein Nazockdast (Iran)
  • Masahiro Ohshima (Japan)
  • Roberto Pantani (Italy)
  • Luiz Antonio Pessan (Brazil)
  • Gerrit W.M. Peters (The Netherlands)
  • Udo Wagenknecht (Germany)
  • Pablo Raimonda (Uruguay)
  • Petr Saha (Czech Republic)
  • Uttandaraman Sundararaj (Canada)
  • Suprakas Sinha Ray (South Africa)
  • Qi Wang (China)

Membership Chair: John Vlachopoulos (Hamilton, ON, Canada)

INTERNATIONAL SCIENTIFIC COMMITTEE

(LISTED ALPHABETICALLY)
GENERAL SYMPOSIA

Blow Molding, Thermoforming and Rotomoulding

  • Albert Van Bael (KU Leuven, Belgium)
  • John Vlachopoulos (McMaster Univ., Canada)
  • Mustafa Bakkal (Istanbul Technical Univ., Turkey)
  • Philippe Boisse (INSA, France)

Extrusion and extrusion processes

  • Ahmet Kaşgöz (İstanbul Univ., Turkey)
  • Göknur Bayram (Middle East Tech. Univ., Turkey)
  • Hossein Nazokdast (Amirkabir Univ., Iran)
  • José António Colaço Gomes Covas (Univ, Minho, Portugal)
  • Jose Maria Kenny (Univ. Perugia, Italy)
  • Osman Ersoy (Arçelik, Turkey)

Fiber, films, and membranes

  • Abdellah Ajji (Polytechnique Montreal, Canada)
  • George Wagner (Amcor Flexibles, Turkey)
  • Hufenus Rudolf (Empa, Switzerland)
  • Luiz A. Pessan (Universidade de Sao Carlos, Brazil)
  • Musa R. Kamal (McGill University, Canada)
  • Mustafa Ersöz (Selçuk Univ., Turkey)
  • Takeshi Kikutani (Tokyo Institute of Tech., Japan)

Injection molding

  • Mehmet Ali Oral (Polyone, Turkey)
  • Andrew Hrymak (U. Western Ontorio, Canada)

Mixing and compounding

  • Guralp Ozkoc (Kocaeli U., Turkey)
  • Ica Manas (Case Western Univ., USA)
  • Krzysztof Wilczyński (Warsaw Univ. Tech., Poland)
  • Yakup Ulcer (Ravago, Turkey)

Morphology and structural development

  • Dilhan Kalyon (Stevens Institute of Tech., USA)
  • Engin Burgaz (19 Mayis U., Turkey)
  • Peter Van Puyvelde (KU Leuven, Belgium)
  • Uttandaraman Sundararaj (Univ. Calgary, Canada)

Polymer blends and alloys

  • Altstädt Volker (University of Bayreuth, Germany)
  • Maazouz Abderrahim (INSA de Lyon, France)
  • Udo Wagenknecht (Leibniz-Institut für Polymerforschung Dresden, Germany)

Polymer composites

  • Mehmet Yildiz (Sabanci Univ., Turkey)
  • Selim Küsefoğlu (Boğaziçi Univ., Turkey)
  • Suprakas Sinha Ray ( DST/CSIR Nanotechnology Innovation Center, S. Africa)

Polymer foams

  • Chul Park (Univ. Toronto, Canada)
  • Lih-sheng Turng (Univ. Wisconsin Madison, USA)
  • Nazım Usta (Pamukkale Univ., Turkey)

Polymer nanocomposites and nanotechnology, nanomaterials

  • Bousmina Mosto (Euromed Univ. Fes, Morocco)
  • Elif Ozden-Yenigun (Royal Collage of Arts, UK)
  • Hulya Cebeci (Istanbul Tech. U., Turkey)
  • Kenig Samuel (Shenkar College of Engineering and Design, Israel)
  • Serap Hayat Soytas (Sabanci Univ., Turkey)

Polymerization and synthesis

  • Bekir Dizman (Sabanci Univ., Turkey)
  • Hayal Bulbul Sonmez (Gebze Tech. Univ., Turkey)
  • İskender Yilgör (Koç U. Turkey)
  • Murat Şen (Hacettepe Univ., Turkey)
  • Turgay Seçkin (Inonu Univ., Turkey)
  • Vural Bütün (Osmangazi Univ., Turkey)

Process modeling and simulations

  • Canan Atılgan (Sabancı U., Turkey)
  • İbrahim İnanç (Ondokuz Univ., Turkey)
  • Kajiwara Toshihisa ( Kyushu Univ. Japan)
  • Mitsoulis Evan (National Technical Univ. Athens, Greece)
  • Türkan Haliloğlu (Boğaziçi Univ., Turkey)

Process monitoring, control and sensors & Advanced complex processing

  • Ito Hiroshi (Yamagata University, Japan)

Reactive processing

  • Costas Tzoganakis (Univ. of Waterloo, Canada)
  • Ümit Gökhan Makal (Ravago, Turkey)

Rheology and rheometry

  • Halil İbrahim Ünal (Gazi Univ., Turkey)
  • İsmail Aydın (İstanbul Univ., Turkey)
  • Jayaraman Krishnamurthy (Michigan State Univ, USA)
  • Necati Özkan (Middle East Tech. Univ., Turkey)
  • Nino Grizzuti (University of Naples, Italy)

Rubber and elastomers

  • Bağdagül Karaağaç (Kocaeli Univ., Turkey)
  • Cassagnau Philippe (Univ. Lyon, France)
  • Seda Yurteri (BriSA, Turkey)
SPECIAL SYMPOSIA

Additive manufacturing (3D printing)

  • Bahattin Koç (Sabancı Univ., Turkey)
  • Dietmar Drummer (Univ. Bayreuth, Germany)
  • Manfred Schmid (Inspire AG, Switzerland)

Biopolymers, eco-friendly polymers and recycling

  • Juan F. Rodriguez (Univ. Castilla-La Mancha, Spain)
  • Kim Ragaert (Univ. Gent, Belgium)
  • Mustafa Yasin SEN (KordSA Global, Turkey)
  • Nesrin Hasırcı (Middle East Tech. Univ., Turkey)
  • Nilgün Cılız (Boğaziçi Univ., Turkey)

High performance polymers & High performance composite processing

  • Ali Durmuş (İstanbul Univ., Turkey)
  • Fazil O. Sonmez (Bogazici Univ. Turkey)
  • Murat Sözer (Koç Univ., Turkey)

Smart materials and polymers for renewable energy

  • Huseyin Deligoz (Istanbul Univ., Turkey)
  • Mehmet Mutlu (TOBB Univ, Turkey)
  • Oğuz Okay (İstanbul Tech. Univ., Turkey)
  • Patrick C. Lee (Univ. Toronto, Canada)